Mosquito Screen on Sliding Door

Warm weather brings with it many good and bad benefits. People love the warm weather because they can vacation to beautiful places. For homeowners, it also brings unwanted guests that want to invade your home if you’re not careful.

To be protected from flies, you rub mosquito repellent on your skin or you spray some type of chemical to kill off these insects. Installing a fly screen on your is like the mosquito repellent for your home especially when you have a sliding door.

 

The weakness of a fly screen is that it easily gets damaged with continued use. Most have more fragile materials because it needs to continue to facilitate air flow and ventilation but also keep the flies from passing through. A hole or tear on your fly screen is a sign that it is damaged and that it needs to get fixed, so you won’t have a problem.

For people who have a damaged fly screen, there are tools you need to have so you can properly perform a repair on a damaged screen. You need a pair of scissors, some fly wire, spline roller, utility knife, plastic spline, and some old newspapers for better packing. Here are some steps you can follow to properly fix your fly screen:

  1. Removal of your fly screen. Make sure that you remove it by laying down the frame for the screen to prevent damages during repair. Keep the screen spline face up to prevent further damage.
  2. The spline connects the whole screen to its frame which means to fix it you should be able to disconnect the screen from the spline. You need to be careful because you don’t want any unnecessary tears/damage.
  3. Ensure the frame for the screen will have it at the center. Cut along the sides if the screen doesn’t fit the frame. There are screen rolls that properly cut the screen for fitting.
  4. The spline should be handled properly to make sure the it fits into all corners of your field of vision.
  5. The spline should also be properly installed because you don’t want the screen to be moving around.
  6. Poking a small hole on the screen will allow the spline to get tucked inside the frame. After that, you proceed with the installation of the spline roller.
  7. The spline roller allows the spline to properly be inserted inside the frame. The entire screen should be properly installed up to the corners of the frame. Be careful not to use any tools such as screwdrivers because it can cause damage the screen you’re not careful.
  8. You have the screen on the frame with the rubber spline on the channel. The screen will be tight if the proper installation of the screen was done.

Those are some of the easy steps that you can do if you plan to install a sliding door in your home. Follow these pointers and your mosquito screen can be properly installed on your sliding doors. Get the perfect protection with these reliable products.

About the Author adadmin

Leave a Comment: